| System Configurations - JETVARNISH 3DS |
| Printing Technology | MGI’s exclusive inkjet engine technology
Drop-on-Demand (DoD) technology
Piezoelectric print heads, developed and manufactured by Konica Minolta
Single pass printing
Flexible & scalable printing architecture |
| Coating Thicknesses | Depending on your file, the inks used and the type of
surface of your sheet, the coating thickness can vary.
On laminated and aqueous coating: 21 μm – 232 μm*
for 3D raised effects and tactile finish. On toner and
coated paper: 30 μm – 116 μm/232* μm for
3D raised effects and a tactile finish |
| Production speed | In 2D/flat mode:
Up to 2,077 A3 sheets per hour (with 21 μm)
In 3D/raised mode:
Up to 1,468 A3 sheets per hour (with 43 μm)
Up to 547 A3 sheets per hour (with 116 micron) |
| Registration | Smart Scanner coupled with Artificial Intelligence (AIS)
for fully real-time automated sheet-to-sheet
registration process. No crop mark required. |
| Formats | Min. 21 x 29.7 cm / 8 x 11.8”
Max. 36.4 x 102 cm / 14.33 x 40.15”
Max. Printable Width 35.3 cm |
| Substrate Thickness | Min: 135 gsm and not less than 150 μm or 6 mil before printing & lamination
Max: 450 gsm and not more than 450 μm or 18 mil before printing & lamination
Motorized height-adjustment print heads |
| Substrates** | Printing on most matte or glossy laminated surfaces,
with or without aqueous coating, layered paper, plastic,
PVC and other coated materials |
| Varnish on toner | Spot 3DS coat directly onto most digital prints with
no lamination or coating required |
| UV Coatings and capacity | 3D varnish delivered with a 10-litre tank capacity |
| High Capacity
Automatic Feeder | Feeder able to handle a paper pile up to 30 cm
2,500 sheets at 135 gsm |
| High Pile Output Stacker | Stacker able to handle a paper pile up to 30 cm
2,500 sheets at 135 gsm |
| Paper Path | 100% flat paper path; Vacuum feed system
Air feed system; Automatic double sheet detection
In-line LED dryer “On-the-fly” drying & curing via integrated LED
Spot Coated sheets can be immediately finished
or handled, no additional drying time required |
| Front End System | Dedicated PC; CPU + touch-screen + keyboard/mouse
Ethernet connection 10/100/1000 BT (RJ 45)
Built-in Application Software Suite
Comprehensive job queue management
Predictive printing cost calculator
(coating consumption)
Dedicated image editor to do local and fast
image editing prior to production |
| Maintenance &
Remote Technical Support | Daily maintenance completed in less than 10 minutes
Majority of procedures are automated
Automatic cleaning system
From cold start to production in less than 10 minutes
Remote troubleshooting & support via included video/
web camera (high speed internet connection required) |
| Operator Panel | Integrated user-friendly LCD touch-screen |
| Options | Twin bar option:
2nd print engine to increase 3D print speed and coating
thickness, up to 232 μm variable data option.
Variable data option:
Complete system including RIP, barcode reader and
MGI software to automatize the association between
a pre-printed barcode and its specific spot coating file |
| Dimensions
(L x W x H) &
Weight | 4.26 (5.47*) x 1.14 x 1.80 meter
(with the longest paper extensions installed)
1 meter clearance required on all 4 sides ± 1,100 kg |
| Electrical requirements | 7.5 kW (32 A) at 220–240 Volts; 2 plug CEE/IP44 32A (1P+N+E) |
| Operating | Temperature: 18 to 30°C
Environment Relative humidity: between 35 – 55%
(no condensation) |
| Respecting the
Environment | Eliminates resource waste (wasted electricity, paper and varnish)
No plates (offset) or screens (screen printing)
No cleanup or preparation between jobs
Drastic reduction in amount of consumables and
use of bulk packaging.
Coating without volatile solvent. |
