CM series safes fulfil all specifications required of the resistance grade III with minimal exterior dimensions. They offer the option of additional locks to give dual control and all models are pre-fitted to enable connection to a burglar alarm system.
| Hinge | DIN right – model designation R option: DIN left |
| Door opening angle 180° | |
| Body | double-walled, reinforced, filled with armoured, high resistant barrier material |
| Door structure | triple-walled, reinforced, filled with armoured, high resistant barrier material, internal boltwork protected by sheets of hardened steel to give extra an -drill resistance |
| Locking mechanism | boltwork with large steel bolts, protected by additional emergency re-lockers, continuous fixed full height bolt on the hinge side |
| Anchoring | prepared for floor and rear wall anchoring anchoring bolts and shields are supplied option: additional anchoring holes (customer specifies position) td> |
| Alarm connection | VdS-certified cable channels to allow connection to a burglar alarm system |
| Colour | inside and outside RAL 7037 dusty grey option: special colour according to RAL |
| Lock | model designation K – double-bit lock VdS class 2, S+G 2 keys (140 mm) model designation E – electronic lock VdS class 2, M-Locks EM3520 option: other lock models (primary lock or possible secondary locks) |
| Equipment | shelf adjustable (height setting 85 mm) option: additional shelf, inside locker, drawer, pull-out shelf, key rack |
| Accessories | option: certified steel plinth to raise the level of the safe, fire protection door rebate seals, alarm switch set, interior lighting |